You have no items in your shopping cart.
Product Description
CLIP-N-FIT®
The patented Clip-N-Fit® feature allows the installer to change the wattage of the heater to a lower output without moving a jumper wire. Each heater is factory wired for its maximum wattage. To change wattage, clip out a jumper as shown in the installation manual for desired wattage. This Clip-N-Fit® feature also prevents the operator from increasing the wattage after installation.
FEATURES
• Dual Protection: Thermal cutout with indicator light and one time thermal fuse.
• Tangential blower for whisper quiet operation.
• Northern White baked enamel finish.
• Open coil element assures quick heat and low maintenance.
• Three piece construction for ease of installation.
• Permanently lubricated, dust protected bearings.
MOUNTING LIMITATIONS
For wall mounting only. Do not install closer than 4" from floor, 6" from adjacent walls, and 12" from the ceiling. Do not install heater behind towel rack, behind door, in floor, in closet, in ceiling, or where airflow may be obstructed. To insure proper operation, maintain 5' minimum clearance to furniture or other objects placed directly in front of the heater.
The patented Clip-N-Fit® feature allows the installer to change the wattage of the heater to a lower output without moving a jumper wire. Each heater is factory wired for its maximum wattage. To change wattage, clip out a jumper as shown in the installation manual for desired wattage. This Clip-N-Fit® feature also prevents the operator from increasing the wattage after installation.
FEATURES
• Dual Protection: Thermal cutout with indicator light and one time thermal fuse.
• Tangential blower for whisper quiet operation.
• Northern White baked enamel finish.
• Open coil element assures quick heat and low maintenance.
• Three piece construction for ease of installation.
• Permanently lubricated, dust protected bearings.
MOUNTING LIMITATIONS
For wall mounting only. Do not install closer than 4" from floor, 6" from adjacent walls, and 12" from the ceiling. Do not install heater behind towel rack, behind door, in floor, in closet, in ceiling, or where airflow may be obstructed. To insure proper operation, maintain 5' minimum clearance to furniture or other objects placed directly in front of the heater.
Additional Information
| Model And Description | Berko | GFR1500 Fan-Forced Wall Heater | 1,500/750/1,125/375 Watts | 120 Volt 1 Phase 12.5/6.3/9.4/3.1 Amps |
| Brand | Berko |
| Energy Source | Electric |
| Voltage | 120 Volts 1 Phase 60 Hertz |
| Capacity | 5,120/2,560/3,840/1,280 BTU/HR or 1,500/750/1,125/375 Watts |
| Product Type | Electric Wall Heater |
| Dimensions | Grille: 7.75"H x 16.875"W x .75"D Back Box: 6.625"H x 14.375"W x 4.375"D |
| Weight | 10 Pounds |
| Link To Catalogs | Berko GFR1500 Catalog
Berko GFR1500 Installation Guide |
| Warranty | Berko GFR1500 Warranty Terms |
| Availability | 3-5 Business Days + Standard Ground Freight |
| Shipping | As always, shipping in the USA (lower 48 states) is included. Orders less than 100 lbs ship via UPS Ground. Larger orders ship via truck (FedEx Freight, Roadway Express, Old Dominion, etc). Local pick-ups at the factory are not allowed. Please contact us for shipping quotes to Hawaii and Alaska. |
| Questions | If you have any questions, please EMAIL or call Toll Free: 877-301-4660. |
