You have no items in your shopping cart.
Product Description
FEATURES
• Produces a flow pattern of warm air five feet wide (four feet above floor). Single compact size (15.75" length x 8.75" width x 6 5/8" depth).
• Both the FDl1500 and FDl1504 are adaptable from 1500W to 750W. Additionally, the FDl1504 may be operated at 208 volts for an output of 1125W or 563W.
• Quick, simple installation. Mounts between floor joists in either direction (parallel or perpendicular to joists). Rough-in the separate housing... then simply insert "plug-in" type heater element and fan assembly.
• Heavy-duty grille can take almost any type abuse!
• Thermostat accessory kit (optional) easily installed in heater (screwdriver adjusted thru grille). When heater is installed for overall room heating, use a wall thermostat.
• Automatic overheat thermal protector and thermal fuse standard.
• Heavy-gauge steel housing.
• Sandalwood baked enamel grille finish.
• 80 CFM.
MOUNTING LIMITATIONS
Do not install in bathroom or other areas where water may enter heater unit. Do not locate where air flow may be obstructed (under drapes, behind doors, etc.). Keep short sides 36" minimum and long side 3" min. from walls. Do not install in ceiling or wall.
• Produces a flow pattern of warm air five feet wide (four feet above floor). Single compact size (15.75" length x 8.75" width x 6 5/8" depth).
• Both the FDl1500 and FDl1504 are adaptable from 1500W to 750W. Additionally, the FDl1504 may be operated at 208 volts for an output of 1125W or 563W.
• Quick, simple installation. Mounts between floor joists in either direction (parallel or perpendicular to joists). Rough-in the separate housing... then simply insert "plug-in" type heater element and fan assembly.
• Heavy-duty grille can take almost any type abuse!
• Thermostat accessory kit (optional) easily installed in heater (screwdriver adjusted thru grille). When heater is installed for overall room heating, use a wall thermostat.
• Automatic overheat thermal protector and thermal fuse standard.
• Heavy-gauge steel housing.
• Sandalwood baked enamel grille finish.
• 80 CFM.
MOUNTING LIMITATIONS
Do not install in bathroom or other areas where water may enter heater unit. Do not locate where air flow may be obstructed (under drapes, behind doors, etc.). Keep short sides 36" minimum and long side 3" min. from walls. Do not install in ceiling or wall.
Additional Information
| Model And Description | QMark | FDI1504 Floor Drop-In Heater | 1,500/750/1,125/563 Watts | 240/208 Volt 1 Phase 6.3/3.1/5.4/2.7 Amps |
| Brand | QMark |
| Energy Source | Electric |
| Voltage | 240/208 Volts 1 Phase 60 Hertz |
| Capacity | 5,120/2,560/3,840/1,922 BTU/HR or 1,500/750/1,125/563 Watts |
| Airflow | 80 CFM |
| Dimensions | 15.75”L x 8.75”W x 6.625”D |
| Weight | 10 Pounds |
| Link To Catalogs | QMark FDI1504 Catalog
QMark FDI1504 Installation Guide |
| Warranty | Qmark FDI1504 Warranty Terms |
| Availability | 3-5 Business Days + Standard Ground Freight |
| Shipping | As always, shipping in the USA (lower 48 states) is included. Orders less than 100 lbs ship via UPS Ground. Larger orders ship via truck (FedEx Freight, Roadway Express, Old Dominion, etc). Local pick-ups at the factory are not allowed. Please contact us for shipping quotes to Hawaii and Alaska. |
| Questions | If you have any questions, please EMAIL or call Toll Free: 877-301-4660. |
