Accessories: Customize Your Order

Detroit Radiant's Installer Qualifications *

• I Am A Qualified Installer And Servicer Of Fuel Fired Appliances And I Understand Detroit Radiant's Installation Manual
• I Am Not A Qualified Installer, But I Will Be Hiring A Qualified Installer And Servicer

Detroit Radiant's Re-Verber-Ray LS-10-25 Fuel Type *

• Natural Gas (5"-14" Pressure Required)
• Propane (11"-14" Pressure Required)

Detroit Radiant's Re-Verber-Ray LS-10-25 Optional Upgrades

• 24 Volt Control Relay - Allows 24V Control (24V Source Required Or Transformer Can Be Ordered Below) +$53.00
• Outdoor Approval Kit - For Heaters Mounted Outdoors +$57.00
• Silicone Sealed Control Box Upgrade - For Highly Corrosive Environments +$48.00
• Stainless Steel Control Box Upgrade - For Highly Corrosive Environments +$120.00
• Stainless Steel Reflector Upgrade - For Highly Corrosive Environments +$194.00
• Stainless Steel Fan Wheel Upgrade - For Highly Corrosive Environments +$31.00

Detroit Radiant's Re-Verber-Ray LS-10-25 Control Accessories

• 120 or 24 Volt Thermostat, 35F-75F Setpoint Range (For 24V Controls, Select 24V Upgrade Above) +$41.00
• 24 Volt Thermostat, 40F-90F Setpoint Range (For 24V Controls, Select 24V Upgrade Above) +$83.00
• 120 Or 24 Volt Thermostat, 40F-100F Setpoint Range, Rain Tight Enclosure (For 24V Controls, Select 24V Upgrade Above) +$92.00
• 24 Volt Thermostat, Digital Display, 45F-90F Setpoint Range (For 24V Controls, Select 24V Upgrade Above) +$60.00
• 120 Volt Thermostat, Programmable, Digital Display, 45F-90F Setpoint Range +$106.00
• 24 Volt Thermostat, Programmable, Digital Display, 45F-90F Setpoint Range (For 24V Controls, Select 24V Upgrade Above) +$95.00
• Metal Thermostat Guard With Locking Key +$48.00
• Plastic Thermostat Guard With Locking Key +$37.00
• 120 Or 24 Volt Manual 60 Minute Timer, Twist Knob, 5 Minute Increments (For 24V Controls, Select 24V Upgrade Above) +$65.00
• 24 Volt Transformer Kit, 40VA (For 24V Controls, Select 24V Upgrade Above) +$27.00

Detroit Radiant's Re-Verber-Ray LS-10-25 Additional Acessories

• FREE 24" Long Stainless Steel Flexible Gas Connector
• 10 Ft. Tube And Reflector Extension Assembly (Max. Total Extension Is 10 Ft.) +$194.00
• Qty. (1) 5 Ft. Tube And Reflector Extension Assembly - Max. 2 Per Unit +$142.00
• Qty. (2) 5 Ft. Tube And Reflector Extension Assemblies - Max. 2 Per Unit +$284.00
• Qty. (1) 90 Degree Radiant Elbow (No Reflectors, Max. 2 Per Unit) +$71.00
• Qty. (2) 90 Degree Radiant Elbows (No Reflectors, Max. 2 Per Unit) +$142.00
• Qty. (1) 90 Degree Elbow Package - Includes Reflectors (Max. 2 Per Unit) +$128.00
• Qty. (2) 90 Degree Elbow Packages - Includes Reflectors (Max. 2 Per Unit) +$256.00
• Qty. (1) 5 Ft. Long Side Shield Extension - Direct Heat Straight Down, Away From Sidewalls Or Combustibles +$40.00
• Qty. (2) 5 Ft. Long Side Shield Extensions - Direct Heat Straight Down, Away From Sidewalls Or Combustibles +$80.00
• Qty. (4) 5 Ft. Long Side Shield Extensions - Direct Heat Straight Down, Away From Sidewalls Or Combustibles +$160.00
• Qty. (1) 5 Ft. Long Stainless Steel Side Shield Extension - Direct Heat Straight Down, Away From Sidewalls Or Combustibles +$81.00
• Qty. (2) 5 Ft. Long Stainless Steel Side Shield Extension - Direct Heat Straight Down, Away From Sidewalls Or Combustibles +$162.00
• Qty. (4) 5 Ft. Long Stainless Steel Side Shield Extension - Direct Heat Straight Down, Away From Sidewalls Or Combustibles +$324.00
• Qty. (1) 5 Ft. Long Wire Mesh Protective Reflector Guard +$116.00
• Qty. (2) 5 Ft. Long Wire Mesh Protective Reflector Guards +$232.00
• Qty. (4) 5 Ft. Long Wire Mesh Protective Reflector Guards +$464.00
• Clearance Safety Limit Sign - 10" X 7", Designed To Be Adhered At Clearance Height +$9.00
• Chain Sets With "S" Hooks +$40.00
• Brass Knuckles Kit - Allows Reflectors To Be Suspended At 15, 30 Or 45 Degree Angles +$40.00

Detroit Radiant's Re-Verber-Ray LS-10-25 Venting Accessories

• 3" Sidewall Venting Kit For 1 Heater (Includes Vent Pipe For Up To 3 Ft. Vent Run) +$110.00
• 4" Sidewall Vent Termination Kit For Dual Venting 2 Heaters On 1 Thermostat (29" Assembled Length) +$87.00
• 3" Roof Venting Kit For 1 Heater - Adapter, Cap, Firestop Spacer, Flashing (0"-6" ptch), Storm Collar, 90 Elbow, Sealant (Connecting B & C Vent NOT Included) +$82.00
• 4" Roof Venting Kit For Dual Venting 2 Heaters On 1 Thermostat - Same Contents As 3" Kit Above +$110.00
• 3"-4" Dual Vent Adapter Y - Y Shaped Vent With (2) 3" and (1) 4" Connections - Heaters Must Share A Common Thermostat +$84.00
• 4" Fresh Air Intake Cap - Sidewall Only (Allows Fresh Air Intake To Be Ducted Max. 20 Ft. - 4" Flex Duct NOT Included) +$18.00
• 3" Unvented Exhaust Termination Cap - NOT FOR RESIDENTIAL USE- Special Flapper Insures Correct Pressures If Unvented +$22.00
• 3" All Weather Sidewall Vent Cap +$27.00
• 3" All Weather Rooftop Vent Cap +$21.00
• Qty. (1) 3" X 18"L Doublewall B-Vent - Use For Wall Or Roof Penetrations +$16.00
• Qty. (2) 3" X 18"L Doublewall B-Vents - Use For Wall Or Roof Penetrations +$32.00
• Qty. (4) 3" X 18"L Doublewall B-Vents - Use For Wall Or Roof Penetrations +$64.00
• Qty. (1) 3" X 60"L Doublewall B-Vent - Use For Wall Or Roof Penetrations +$41.00
• Qty. (2) 3" X 60"L Doublewall B-Vents - Use For Wall Or Roof Penetrations +$82.00
• Qty. (4) 3" X 60"L Doublewall B-Vents - Use For Wall Or Roof Penetrations +$164.00
• 3" Wall Thimble - Use With B-Vent For Wall Or Roof Penetrations +$23.00
• Qty. (1) 3" X 36"L Single Wall "C" Vent - Do Not Use Through Walls Or Roof +$10.00
• Qty. (2) 3" X 36"L Single Wall "C" Vents - Do Not Use Through Wall Or Roof +$20.00
• Qty. (4) 3" X 36"L Single Wall "C" Vents - Do Not Use Through Wall Or Roof +$40.00
• 3" B To C Vent Adapter +$13.00
• 3" 90 Degree Vent Elbow For Vertical Venting (NOT Radiant Tube Elbow!) +$7.00
• 3" Firestop Spacer For Venting Through A Ceiling +$10.00
• 3" Adjustable (0/12-6/12 Pitch) Roof Flashing +$14.00
• 3" Storm Collar - Prevents Rain From Entering Flashing +$5.00

* Required Fields