TPI TAT Style / TAT-8 W/3 TAT/1 TIMER Specifications:
Base Unit TAT-8-240-1:
• KW: 8.4
• BTU/HR: 28,670
• Volts: 240
• Phase: 1
• Amps: 37
• Plug Type: Nema 14-50
Supplemental Convector TAT-1-120-1 (Qty:3):
• KW: 1.5 (Each)
• BTU/HR: 5,120 (Each)
• Volts: 120
• Phase: 1
• Amps: 12.5 (Each)
• Plug Type: Nema 5-15

TPI TAT TAT-8-240-1 Base Unit Features:
• Heavy duty stainless steel spiral fin heating elements.
• High temperature, ball bearing 1/3 hp - 1075 rpm blower motor.
• Forward curved centrifugal blower-900 cfm of air output secondary protection.
Safety devices include airflow switch, disconnect switch, automatic limit control and manual reset limit control for secondary protection.
• 50 amp unit may be linked to a 30 amp unit to provide heating for larger spaces.
• Timer/Temp controller may be used to control both units but must use the 50 amp base unit as the master.

TPI TAT TAT-1-120-1 Supplemental Convectors Features:
• 3 convectors are an integral part of each TAT system.
• 120 volt, 15 amp (Standard wall plug) - 5120 BTU size.
• Supplied with 25' prewired cable that connects them to the TAT base unit control section with a three pin connector.
• If used in front of windows or large glass doors, they will reduce heat loss and provide more even heating.

TPI TAT Timer/Temperature Control Unit Features:
• Timer/Temp Controller is an integral part of the TAT system.
• 24 volt control device that controls the heat output of the TAT base unit and up to three TAT convectors for an
operating range of 120 - 150 degrees F and for a time period of 1 -10 hours after the preset temperature is reached.
• Supplied with a 25' prewired cable that connects to the TAT base unit control section using a four pin connector.
• Mounts on Door outside the area being treated.
• LED lights will indicate when treatment is complete.